[ Jan 30 07:00:56 Enabled. ]
[ Jan 30 07:00:56 Rereading configuration. ]
[ Jan 30 07:00:59 Rereading configuration. ]
[ Jan 30 07:01:04 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:04.882309423Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:04.886305774Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:04.892883307Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:04.897108184Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:04.900232311Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:05.361124673Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T07:01:05.367251683Z","hostname":"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0","pid":28171,"zonename":"\"oxz_oximeter_0c4515bc-6363-4abe-b3b6-ab9c12ff90b0\""}
[ Jan 30 07:01:05 Method "start" exited with status 0. ]