[ Jan 30 16:34:15 Enabled. ]
[ Jan 30 16:34:15 Rereading configuration. ]
[ Jan 30 16:34:16 Rereading configuration. ]
[ Jan 30 16:34:20 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.235347354Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.243971818Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.254010327Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.259120509Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.264511185Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.728380571Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T16:34:20.744358486Z","hostname":"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49","pid":24051,"zonename":"\"oxz_crucible_64f9c190-b059-430a-82e0-0d0e84b7ff49\""}
[ Jan 30 16:34:20 Method "start" exited with status 0. ]