[ Jan 30 21:14:09 Enabled. ]
[ Jan 30 21:14:09 Rereading configuration. ]
[ Jan 30 21:14:10 Rereading configuration. ]
[ Jan 30 21:14:15 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.168073316Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.169138783Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.175708844Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.178518017Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.182120411Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.652252892Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-01-30T21:14:16.665651591Z","hostname":"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041","pid":23898,"zonename":"\"oxz_crucible_d9e34218-4aca-4ef4-b0b2-3fdac8e6b041\""}
[ Jan 30 21:14:16 Method "start" exited with status 0. ]