[ Feb  1 14:36:24 Enabled. ]
[ Feb  1 14:36:24 Rereading configuration. ]
[ Feb  1 14:36:27 Rereading configuration. ]
[ Feb  1 14:36:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.021621367Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.026752916Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.034179506Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.037483459Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.040477501Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.511831279Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-01T14:36:31.521763807Z","hostname":"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33","pid":25485,"zonename":"\"oxz_crucible_3889e07f-8c91-47d1-9f09-294e1f82ff33\""}
[ Feb  1 14:36:31 Method "start" exited with status 0. ]