[ Feb  3 21:14:56 Enabled. ]
[ Feb  3 21:14:56 Rereading configuration. ]
[ Feb  3 21:14:58 Rereading configuration. ]
[ Feb  3 21:15:04 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:04.614895259Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:04.620129197Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:04.629600702Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:04.633423337Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:04.637694875Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:05.093850288Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-03T21:15:05.143968976Z","hostname":"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e","pid":29965,"zonename":"\"oxz_crucible_23227e0a-2226-474b-bfac-c94952e1064e\""}
[ Feb  3 21:15:05 Method "start" exited with status 0. ]