[ Feb  4 04:40:16 Enabled. ]
[ Feb  4 04:40:16 Rereading configuration. ]
[ Feb  4 04:40:17 Rereading configuration. ]
[ Feb  4 04:40:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.289522302Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.299231563Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.309042705Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.313215741Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.31759408Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.777201928Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T04:40:21.78777484Z","hostname":"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded","pid":25260,"zonename":"\"oxz_crucible_50c86baf-a566-4928-85aa-46cbb7483ded\""}
[ Feb  4 04:40:21 Method "start" exited with status 0. ]