[ Feb  4 05:46:04 Enabled. ]
[ Feb  4 05:46:04 Rereading configuration. ]
[ Feb  4 05:46:06 Rereading configuration. ]
[ Feb  4 05:46:13 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.239389954Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.243534998Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.250728556Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.253636776Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.256722111Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.715952377Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-04T05:46:14.760645327Z","hostname":"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf","pid":25664,"zonename":"\"oxz_crucible_04bd0292-2e40-4e89-b1f7-4fa03d3a1cbf\""}
[ Feb  4 05:46:14 Method "start" exited with status 0. ]