[ Feb  6 01:19:35 Enabled. ]
[ Feb  6 01:19:35 Rereading configuration. ]
[ Feb  6 01:19:36 Rereading configuration. ]
[ Feb  6 01:19:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.552783829Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.559624756Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.566715634Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.570091137Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.573076357Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:42.043234017Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:42.074364709Z","hostname":"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8","pid":25547,"zonename":"\"oxz_crucible_1da43855-3ced-497e-8cfd-c32c66488bd8\""}
[ Feb  6 01:19:42 Method "start" exited with status 0. ]