[ Feb  6 01:19:34 Enabled. ]
[ Feb  6 01:19:34 Rereading configuration. ]
[ Feb  6 01:19:36 Rereading configuration. ]
[ Feb  6 01:19:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.801727343Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.808686831Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.816171562Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.820041048Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:41.824459448Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:42.294252606Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-06T01:19:42.317906006Z","hostname":"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368","pid":25755,"zonename":"\"oxz_crucible_47ff40d2-b326-4696-bbd9-20c1c9bdf368\""}
[ Feb  6 01:19:42 Method "start" exited with status 0. ]