| 1 | | [ Feb 10 18:39:58 Enabled. ] |
| 2 | | [ Feb 10 18:39:58 Rereading configuration. ] |
| 3 | | [ Feb 10 18:39:59 Rereading configuration. ] |
| 4 | | [ Feb 10 18:40:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-10T18:40:03.087Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService11
|
| 7 | 2026-02-10T18:40:03.096Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService11
|
| 8 | 2026-02-10T18:40:03.105Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-10T18:40:03.109Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-10T18:40:03.115Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService11"
static address = fd00:1122:3344:101::16
|
| 11 | 2026-02-10T18:40:03.582Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-10T18:40:03.606Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_7e178fd6-af41-47b5-89bb-e679c17373c0"
|
| 13 | | [ Feb 10 18:40:03 Method "start" exited with status 0. ] |