[ Feb 11 23:53:58 Enabled. ]
[ Feb 11 23:53:58 Rereading configuration. ]
[ Feb 11 23:54:00 Rereading configuration. ]
[ Feb 11 23:54:05 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:05.524856727Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:05.533702429Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:05.544377776Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:05.548970296Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:05.554407492Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:06.023135024Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-11T23:54:06.042147914Z","hostname":"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2","pid":23399,"zonename":"\"oxz_oximeter_6d25d03e-0b8a-4c05-ab6f-042fb32e44b2\""}
[ Feb 11 23:54:06 Method "start" exited with status 0. ]