[ Feb 12 06:39:24 Enabled. ]
[ Feb 12 06:39:24 Rereading configuration. ]
[ Feb 12 06:39:25 Rereading configuration. ]
[ Feb 12 06:39:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:27.927466054Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:27.936875947Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:27.951042981Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:27.957243781Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:27.964071127Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:28.423190844Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:39:28.440216163Z","hostname":"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59","pid":21973,"zonename":"\"oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59\""}
[ Feb 12 06:39:28 Method "start" exited with status 0. ]