| 1 | | [ Feb 12 06:39:24 Enabled. ] |
| 2 | | [ Feb 12 06:39:24 Rereading configuration. ] |
| 3 | | [ Feb 12 06:39:25 Rereading configuration. ] |
| 4 | | [ Feb 12 06:39:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-12T06:39:27.927Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService20
|
| 7 | 2026-02-12T06:39:27.936Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService20
|
| 8 | 2026-02-12T06:39:27.951Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-12T06:39:27.957Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-12T06:39:27.964Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService20"
static address = fd00:1122:3344:101::15
|
| 11 | 2026-02-12T06:39:28.423Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-12T06:39:28.440Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_efacfc7e-99d3-41ae-ae63-82081b2c9c59"
|
| 13 | | [ Feb 12 06:39:28 Method "start" exited with status 0. ] |