[ Feb 12 06:37:45 Enabled. ]
[ Feb 12 06:37:45 Rereading configuration. ]
[ Feb 12 06:37:46 Rereading configuration. ]
[ Feb 12 06:37:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService2 -s fd00:1122:3344:3::1 -g fd00:1122:3344:3::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:46.854534734Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230,"datalink":"oxControlService2"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:46.860042215Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230,"datalink":"oxControlService2"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:46.866191664Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:46.870067464Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:46.872912187Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230,"static address":"fd00:1122:3344:3::1","data link":"\"oxControlService2\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:47.327011324Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230,"gateway":"fd00:1122:3344:3::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T06:37:47.33266584Z","hostname":"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614","pid":5230,"zonename":"\"oxz_internal_dns_b6ea540d-0874-422a-8e22-faa930f6b614\""}
[ Feb 12 06:37:47 Method "start" exited with status 0. ]