[ Feb 12 17:07:27 Enabled. ]
[ Feb 12 17:07:28 Rereading configuration. ]
[ Feb 12 17:07:33 Rereading configuration. ]
[ Feb 12 17:07:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:37.56229763Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:37.572310637Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:37.581847351Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:37.586333295Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:37.58978034Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:38.055489661Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-12T17:07:38.069797637Z","hostname":"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529","pid":22533,"zonename":"\"oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529\""}
[ Feb 12 17:07:38 Method "start" exited with status 0. ]