| 1 | | [ Feb 12 17:07:27 Enabled. ] |
| 2 | | [ Feb 12 17:07:28 Rereading configuration. ] |
| 3 | | [ Feb 12 17:07:33 Rereading configuration. ] |
| 4 | | [ Feb 12 17:07:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-12T17:07:37.562Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService11
|
| 7 | 2026-02-12T17:07:37.572Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService11
|
| 8 | 2026-02-12T17:07:37.581Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-12T17:07:37.586Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-12T17:07:37.589Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService11"
static address = fd00:1122:3344:101::13
|
| 11 | 2026-02-12T17:07:38.055Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-12T17:07:38.069Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_2beddd96-589c-424a-8159-c2f871c6f529"
|
| 13 | | [ Feb 12 17:07:38 Method "start" exited with status 0. ] |