[ Feb 14 05:14:26 Enabled. ]
[ Feb 14 05:14:26 Rereading configuration. ]
[ Feb 14 05:14:29 Rereading configuration. ]
[ Feb 14 05:14:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:32.820920233Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:32.830192106Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:32.839721134Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:32.844646762Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:32.850691446Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:33.308123459Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-14T05:14:33.317206336Z","hostname":"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b","pid":23745,"zonename":"\"oxz_crucible_773ba361-bb32-4129-a05e-4fd3825f8c2b\""}
[ Feb 14 05:14:33 Method "start" exited with status 0. ]