[ Feb 17 00:05:21 Enabled. ]
[ Feb 17 00:05:21 Rereading configuration. ]
[ Feb 17 00:05:23 Rereading configuration. ]
[ Feb 17 00:05:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:27.514812145Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:27.523159008Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:27.534620695Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:27.540506916Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:27.546296705Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:28.008962481Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T00:05:28.040539243Z","hostname":"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7","pid":24124,"zonename":"\"oxz_crucible_08c0ac09-4219-4abf-a197-eb02da4426e7\""}
[ Feb 17 00:05:28 Method "start" exited with status 0. ]