[ Feb 17 17:08:28 Enabled. ]
[ Feb 17 17:08:28 Rereading configuration. ]
[ Feb 17 17:08:29 Rereading configuration. ]
[ Feb 17 17:08:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:30.959495259Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318,"datalink":"oxControlService8"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:30.971064869Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318,"datalink":"oxControlService8"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:30.977719442Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:30.98087314Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:30.984444268Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318,"static address":"fd00:1122:3344:101::3","data link":"\"oxControlService8\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:31.440399324Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:08:31.449171953Z","hostname":"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366","pid":10318,"zonename":"\"oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366\""}
[ Feb 17 17:08:31 Method "start" exited with status 0. ]