| 1 | | [ Feb 17 17:08:28 Enabled. ] |
| 2 | | [ Feb 17 17:08:28 Rereading configuration. ] |
| 3 | | [ Feb 17 17:08:29 Rereading configuration. ] |
| 4 | | [ Feb 17 17:08:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-17T17:08:30.959Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService8
|
| 7 | 2026-02-17T17:08:30.971Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService8
|
| 8 | 2026-02-17T17:08:30.977Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-17T17:08:30.980Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-17T17:08:30.984Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService8"
static address = fd00:1122:3344:101::3
|
| 11 | 2026-02-17T17:08:31.440Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-17T17:08:31.449Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_5b2f7b47-b26a-49f6-af75-86b40a2ff366"
|
| 13 | | [ Feb 17 17:08:31 Method "start" exited with status 0. ] |