[ Feb 17 17:09:24 Enabled. ]
[ Feb 17 17:09:24 Rereading configuration. ]
[ Feb 17 17:09:25 Rereading configuration. ]
[ Feb 17 17:09:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.099434603Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.105890632Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.112849753Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.116007881Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.119498356Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.585964629Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-17T17:09:33.599048782Z","hostname":"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91","pid":23705,"zonename":"\"oxz_crucible_9a1fd08f-cb80-4387-ab36-b4ea29c4ff91\""}
[ Feb 17 17:09:33 Method "start" exited with status 0. ]