[ Feb 18 17:28:12 Enabled. ]
[ Feb 18 17:28:12 Rereading configuration. ]
[ Feb 18 17:28:13 Rereading configuration. ]
[ Feb 18 17:28:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:18.826297262Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:18.832107231Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:18.839414955Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:18.842601577Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:18.845768739Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:19.306771413Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-18T17:28:19.327638853Z","hostname":"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349","pid":23816,"zonename":"\"oxz_crucible_d549391e-099f-4a0c-8847-0e860c164349\""}
[ Feb 18 17:28:19 Method "start" exited with status 0. ]