[ Feb 19 01:36:29 Enabled. ]
[ Feb 19 01:36:29 Rereading configuration. ]
[ Feb 19 01:36:33 Rereading configuration. ]
[ Feb 19 01:36:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.887411552Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.894219813Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.904117043Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.908505157Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.912501934Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:43.373318174Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:43.390380872Z","hostname":"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce","pid":24968,"zonename":"\"oxz_crucible_fabf2686-ff99-4a25-baf7-910c77bc32ce\""}
[ Feb 19 01:36:43 Method "start" exited with status 0. ]