[ Feb 19 01:36:29 Enabled. ]
[ Feb 19 01:36:29 Rereading configuration. ]
[ Feb 19 01:36:31 Rereading configuration. ]
[ Feb 19 01:36:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.403711163Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.409644187Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.416195903Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.41914839Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.422233039Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.884666009Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-19T01:36:42.906859926Z","hostname":"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380","pid":24744,"zonename":"\"oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380\""}
[ Feb 19 01:36:42 Method "start" exited with status 0. ]