| 1 | | [ Feb 19 01:36:29 Enabled. ] |
| 2 | | [ Feb 19 01:36:29 Rereading configuration. ] |
| 3 | | [ Feb 19 01:36:31 Rereading configuration. ] |
| 4 | | [ Feb 19 01:36:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-19T01:36:42.403Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService10
|
| 7 | 2026-02-19T01:36:42.409Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService10
|
| 8 | 2026-02-19T01:36:42.416Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-19T01:36:42.419Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-19T01:36:42.422Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService10"
static address = fd00:1122:3344:101::d
|
| 11 | 2026-02-19T01:36:42.884Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-19T01:36:42.906Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_oximeter_2f45c744-4968-49e3-b8ab-85c86e98e380"
|
| 13 | | [ Feb 19 01:36:42 Method "start" exited with status 0. ] |