[ Feb 23 16:30:44 Enabled. ]
[ Feb 23 16:30:44 Rereading configuration. ]
[ Feb 23 16:30:49 Rereading configuration. ]
[ Feb 23 16:30:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.491689432Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.49789586Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.505641939Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.509025869Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.51246402Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.978093277Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:56.008299948Z","hostname":"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345","pid":28451,"zonename":"\"oxz_oximeter_9b37a522-5e18-4cb1-924f-8eea13ce9345\""}
[ Feb 23 16:30:56 Method "start" exited with status 0. ]