[ Feb 23 16:30:45 Enabled. ]
[ Feb 23 16:30:45 Rereading configuration. ]
[ Feb 23 16:30:47 Rereading configuration. ]
[ Feb 23 16:30:54 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.275146578Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.281699453Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.288954512Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.292199479Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.295929336Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.765149327Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-23T16:30:55.789879485Z","hostname":"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2","pid":28159,"zonename":"\"oxz_crucible_2db46011-b325-46e4-8657-3fa8d0d830c2\""}
[ Feb 23 16:30:55 Method "start" exited with status 0. ]