| 1 | | [ Feb 24 04:31:49 Enabled. ] |
| 2 | | [ Feb 24 04:31:49 Rereading configuration. ] |
| 3 | | [ Feb 24 04:31:50 Rereading configuration. ] |
| 4 | | [ Feb 24 04:31:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-02-24T04:31:53.428Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService19
|
| 7 | 2026-02-24T04:31:53.441Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService19
|
| 8 | 2026-02-24T04:31:53.453Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-02-24T04:31:53.458Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-02-24T04:31:53.463Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService19"
static address = fd00:1122:3344:101::18
|
| 11 | 2026-02-24T04:31:53.930Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-02-24T04:31:53.948Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_b1232a0f-363a-425a-bef6-74f469ded2f2"
|
| 13 | | [ Feb 24 04:31:53 Method "start" exited with status 0. ] |