[ Feb 25 21:41:11 Enabled. ]
[ Feb 25 21:41:11 Rereading configuration. ]
[ Feb 25 21:41:13 Rereading configuration. ]
[ Feb 25 21:41:17 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:17.737954034Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:17.745804845Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:17.754170989Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:17.758468703Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:17.762781296Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:18.225977499Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-25T21:41:18.242184414Z","hostname":"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523","pid":23476,"zonename":"\"oxz_crucible_5b1fb8ff-6b1e-4ff3-a350-37e6ca3c7523\""}
[ Feb 25 21:41:18 Method "start" exited with status 0. ]