[ Feb 26 17:10:07 Enabled. ]
[ Feb 26 17:10:07 Rereading configuration. ]
[ Feb 26 17:10:09 Rereading configuration. ]
[ Feb 26 17:10:12 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:12.859853873Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:12.869111039Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:12.882287804Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:12.886172056Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:12.892586549Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:13.357553966Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-26T17:10:13.372767868Z","hostname":"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320","pid":22962,"zonename":"\"oxz_crucible_5778c8b3-e0c3-432c-9c1f-3a728944f320\""}
[ Feb 26 17:10:13 Method "start" exited with status 0. ]