[ Feb 27 03:04:19 Enabled. ]
[ Feb 27 03:04:19 Rereading configuration. ]
[ Feb 27 03:04:23 Rereading configuration. ]
[ Feb 27 03:04:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.025985454Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.031463776Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.038745815Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.041916597Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.044871444Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.507992555Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.531489304Z","hostname":"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72","pid":28624,"zonename":"\"oxz_crucible_1b42885d-4b91-40f4-9ddc-83f32cc1ea72\""}
[ Feb 27 03:04:33 Method "start" exited with status 0. ]