[ Feb 27 03:04:19 Enabled. ]
[ Feb 27 03:04:19 Rereading configuration. ]
[ Feb 27 03:04:23 Rereading configuration. ]
[ Feb 27 03:04:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.207678909Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.207845854Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.213990703Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.217129584Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.220186414Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.678805119Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-02-27T03:04:33.693132411Z","hostname":"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7","pid":28574,"zonename":"\"oxz_oximeter_7fea2045-0cbb-40ed-89a6-7cf5b5bbd6f7\""}
[ Feb 27 03:04:33 Method "start" exited with status 0. ]