[ Mar  2 22:29:18 Enabled. ]
[ Mar  2 22:29:18 Rereading configuration. ]
[ Mar  2 22:29:20 Rereading configuration. ]
[ Mar  2 22:29:25 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.189458366Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.193648184Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.200616466Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.203504652Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.206791476Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.6771091Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.691445671Z","hostname":"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9","pid":24897,"zonename":"\"oxz_crucible_3f5942b4-ed69-43ef-adb0-36f70a6c76a9\""}
[ Mar  2 22:29:26 Method "start" exited with status 0. ]