[ Mar  2 22:29:18 Enabled. ]
[ Mar  2 22:29:18 Rereading configuration. ]
[ Mar  2 22:29:20 Rereading configuration. ]
[ Mar  2 22:29:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.13319178Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.139462481Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.146502634Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.149557724Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.153299604Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.609547372Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-02T22:29:26.618293023Z","hostname":"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7","pid":24981,"zonename":"\"oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7\""}
[ Mar  2 22:29:26 Method "start" exited with status 0. ]