| 1 | | [ Mar 2 22:29:18 Enabled. ] |
| 2 | | [ Mar 2 22:29:18 Rereading configuration. ] |
| 3 | | [ Mar 2 22:29:20 Rereading configuration. ] |
| 4 | | [ Mar 2 22:29:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-02T22:29:26.133Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService20
|
| 7 | 2026-03-02T22:29:26.139Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService20
|
| 8 | 2026-03-02T22:29:26.146Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-02T22:29:26.149Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-02T22:29:26.153Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService20"
static address = fd00:1122:3344:101::d
|
| 11 | 2026-03-02T22:29:26.609Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-02T22:29:26.618Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_oximeter_d5c4cf2a-8466-4cfd-a5c8-e552f02893f7"
|
| 13 | | [ Mar 2 22:29:26 Method "start" exited with status 0. ] |