| 1 | | [ Mar 3 19:14:15 Enabled. ] |
| 2 | | [ Mar 3 19:14:15 Rereading configuration. ] |
| 3 | | [ Mar 3 19:14:16 Rereading configuration. ] |
| 4 | | [ Mar 3 19:14:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-03T19:14:24.848Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService18
|
| 7 | 2026-03-03T19:14:24.853Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService18
|
| 8 | 2026-03-03T19:14:24.859Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-03T19:14:24.862Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-03T19:14:24.865Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService18"
static address = fd00:1122:3344:101::14
|
| 11 | 2026-03-03T19:14:25.320Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-03T19:14:25.328Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_7a90ec28-cb98-4ff8-a531-1ac3b1997d4a"
|
| 13 | | [ Mar 3 19:14:25 Method "start" exited with status 0. ] |