[ Mar  3 19:14:12 Enabled. ]
[ Mar  3 19:14:12 Rereading configuration. ]
[ Mar  3 19:14:14 Rereading configuration. ]
[ Mar  3 19:14:20 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:21.846094354Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:21.851771625Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:21.857828513Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:21.861001073Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:21.863693377Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:22.326720466Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-03T19:14:22.348807341Z","hostname":"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec","pid":22916,"zonename":"\"oxz_crucible_9e1a9b2e-dcad-4cd9-9307-8c3412bd2aec\""}
[ Mar  3 19:14:22 Method "start" exited with status 0. ]