[ Mar  5 05:26:51 Enabled. ]
[ Mar  5 05:26:51 Rereading configuration. ]
[ Mar  5 05:26:53 Rereading configuration. ]
[ Mar  5 05:26:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:55.963309348Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:55.971391576Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:55.982620878Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:55.986452734Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:55.991034382Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:56.454551835Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T05:26:56.473929506Z","hostname":"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616","pid":21534,"zonename":"\"oxz_crucible_8cf5a776-4f4e-41de-8f13-f20cf59a5616\""}
[ Mar  5 05:26:56 Method "start" exited with status 0. ]