[ Mar  5 17:49:34 Enabled. ]
[ Mar  5 17:49:34 Rereading configuration. ]
[ Mar  5 17:49:36 Rereading configuration. ]
[ Mar  5 17:49:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:38.941200272Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:38.944438562Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:38.950398903Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:38.953119895Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:38.955997529Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:39.417355315Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-05T17:49:39.439292651Z","hostname":"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896","pid":23544,"zonename":"\"oxz_crucible_16cdde18-1d31-405c-8894-5a532bde7896\""}
[ Mar  5 17:49:39 Method "start" exited with status 0. ]