[ Mar  6 19:41:57 Enabled. ]
[ Mar  6 19:41:57 Rereading configuration. ]
[ Mar  6 19:41:59 Rereading configuration. ]
[ Mar  6 19:42:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:03.972986904Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:03.978428894Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:03.984666983Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:03.987520046Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:03.990278637Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:04.455880588Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-06T19:42:04.474490614Z","hostname":"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21","pid":24005,"zonename":"\"oxz_oximeter_9fe51b1c-5632-481c-b0c5-a3e3614b5a21\""}
[ Mar  6 19:42:04 Method "start" exited with status 0. ]