[ Mar 10 10:15:55 Enabled. ]
[ Mar 10 10:15:55 Rereading configuration. ]
[ Mar 10 10:15:57 Rereading configuration. ]
[ Mar 10 10:16:00 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:00.646279797Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:00.655827351Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:00.667844367Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:00.673169202Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:00.678659385Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:01.142618065Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T10:16:01.161531631Z","hostname":"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b","pid":27894,"zonename":"\"oxz_crucible_1f889d14-d9e9-483e-b8d4-972043984b4b\""}
[ Mar 10 10:16:01 Method "start" exited with status 0. ]