[ Mar 10 19:33:14 Enabled. ]
[ Mar 10 19:33:14 Rereading configuration. ]
[ Mar 10 19:33:17 Rereading configuration. ]
[ Mar 10 19:33:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.171025129Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.178114784Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.188506285Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.193284886Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.197297279Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.658142166Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-10T19:33:22.670257377Z","hostname":"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234","pid":23846,"zonename":"\"oxz_oximeter_4f4a32d5-40b6-4392-a0c1-06721335a234\""}
[ Mar 10 19:33:22 Method "start" exited with status 0. ]