[ Mar 11 22:15:49 Enabled. ]
[ Mar 11 22:15:49 Rereading configuration. ]
[ Mar 11 22:15:50 Rereading configuration. ]
[ Mar 11 22:15:54 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:54.973842729Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:54.978596068Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:54.985630901Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:54.989546206Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:54.992558263Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:55.462300574Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-11T22:15:55.488054232Z","hostname":"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8","pid":29239,"zonename":"\"oxz_crucible_c7a9c8f8-7647-4d7f-95ce-11609a2ff3c8\""}
[ Mar 11 22:15:55 Method "start" exited with status 0. ]