[ Mar 13 18:47:51 Enabled. ]
[ Mar 13 18:47:51 Rereading configuration. ]
[ Mar 13 18:47:54 Rereading configuration. ]
[ Mar 13 18:48:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.186666409Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.191111672Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.198882964Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.202380158Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.206003937Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.671454008Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-13T18:48:03.703636879Z","hostname":"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722","pid":27655,"zonename":"\"oxz_crucible_f83e5021-d90f-42d2-bff5-cf49ff1fc722\""}
[ Mar 13 18:48:03 Method "start" exited with status 0. ]