| 1 | | [ Mar 14 00:41:52 Enabled. ] |
| 2 | | [ Mar 14 00:41:52 Rereading configuration. ] |
| 3 | | [ Mar 14 00:41:52 Rereading configuration. ] |
| 4 | | [ Mar 14 00:41:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-14T00:41:53.613Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService8
|
| 7 | 2026-03-14T00:41:53.618Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService8
|
| 8 | 2026-03-14T00:41:53.625Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-14T00:41:53.628Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-14T00:41:53.631Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService8"
static address = fd00:1122:3344:101::3
|
| 11 | 2026-03-14T00:41:54.089Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-14T00:41:54.097Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_ff550391-bd63-47bb-8b25-1a20f82524c0"
|
| 13 | | [ Mar 14 00:41:54 Method "start" exited with status 0. ] |