[ Mar 14 00:42:40 Enabled. ]
[ Mar 14 00:42:40 Rereading configuration. ]
[ Mar 14 00:42:45 Rereading configuration. ]
[ Mar 14 00:42:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.394686954Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.399997456Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.407182501Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.410198018Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.413246412Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.869132418Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T00:42:52.877250858Z","hostname":"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b","pid":23792,"zonename":"\"oxz_oximeter_86bd6791-2c20-4450-a392-cf41fddf4d0b\""}
[ Mar 14 00:42:52 Method "start" exited with status 0. ]