[ Mar 14 20:52:19 Enabled. ]
[ Mar 14 20:52:19 Rereading configuration. ]
[ Mar 14 20:52:20 Rereading configuration. ]
[ Mar 14 20:52:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:22.888338986Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:22.897696435Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:22.90602927Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:22.911085149Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:22.914709749Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:23.378194684Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-14T20:52:23.39092645Z","hostname":"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a","pid":22952,"zonename":"\"oxz_crucible_58020a7e-9a90-474f-ab11-24a762303e8a\""}
[ Mar 14 20:52:23 Method "start" exited with status 0. ]