[ Mar 16 20:52:23 Enabled. ]
[ Mar 16 20:52:23 Rereading configuration. ]
[ Mar 16 20:52:25 Rereading configuration. ]
[ Mar 16 20:52:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:27.597025952Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:27.606319517Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:27.617146024Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:27.624913689Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:27.633325641Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:28.091676436Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-16T20:52:28.103207521Z","hostname":"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a","pid":22574,"zonename":"\"oxz_oximeter_489e5fe5-97b1-4a16-9a13-a340ba52199a\""}
[ Mar 16 20:52:28 Method "start" exited with status 0. ]