[ Mar 17 21:59:58 Enabled. ]
[ Mar 17 21:59:58 Rereading configuration. ]
[ Mar 17 22:00:01 Rereading configuration. ]
[ Mar 17 22:00:08 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:08.920438788Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:08.926159238Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:08.933384187Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:08.936278712Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:08.939359872Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:09.399679341Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-17T22:00:09.411309595Z","hostname":"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c","pid":29019,"zonename":"\"oxz_crucible_0bfe9128-4adf-4b5c-a9df-11ee9b70fd7c\""}
[ Mar 17 22:00:09 Method "start" exited with status 0. ]