[ Mar 18 02:25:56 Enabled. ]
[ Mar 18 02:25:56 Rereading configuration. ]
[ Mar 18 02:25:59 Rereading configuration. ]
[ Mar 18 02:26:09 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:09.992468036Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:09.999336142Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.007840955Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.011427117Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.015255946Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.49079669Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.50305407Z","hostname":"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a","pid":23135,"zonename":"\"oxz_crucible_c03a2bd7-d13f-4e77-ad90-70dddd0a320a\""}
[ Mar 18 02:26:10 Method "start" exited with status 0. ]